12HP 2Stroke Outboard Motor 169CC Fishing Boat Engine CDI Water Cooling HANGKAI
Manufacturer Part Number: Does Not Apply
Engine(HP): 12HP
Stroke: 2-stroke
Warranty: 3 Year
Custom Bundle: Yes
Bundle Description: Phone Kit
Modification Description:
Non-Domestic Product:
Applicable Regions:
California Prop 65 Warning:
Country/Region of Manufacture: United States
Core Charge:
CLICK HERE TO VIEW THE PRICE
MORE DETAILS ON THIS BOAT PART
Do you want to see more pictures of this boat part? Click Here
Brand: HANGKAI Displacement: 169CC Gear ratio: 2.08(27:13) Cylinder: 2 Max.speed(r/min): 4500-5500 Gear Positions: F-N-R Packing size: 120×70.5×37.5cm Ignition System: CDI Cooling System: Water-cooling Control System: Tiller control Starting System: Manual start Control System: #93 gasoline N.W./G.W.(kgs): 27/31 Bore x Stroke(mm): 50×43 Recommended Propeller range: 3 -9″1/4”x8″ Recommended Lubricant: 2 Stroke Lubricating oil Mixing ratio: Fuel:oil=50:1 Trim and tilt system: Manual Tilt Overall LxWxH(cm): 78.3×33.2×104 Standard fuel tank capacity: 24L Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor. Must Read before using!Two stroke 12 hp:Firstly, Fill the gear oil (open gear box lid and fill it).Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.Thirdly, Fill engine oil don’t exceed the head of the pattern.Forthly, turn the throttle to the start up and turn the accelerator gets up to 50%.Then, Rapidly pull the starter line.After the motor start, please turn the throttle to running state.Then, it can be operated now.Don’t do the following will avoid cylinder Scoring:1?start the motor in the water2, use the motor when it stop cyling waterEven if you want test the motor, it should be done in the river!When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.About certification:We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.Several issues with this motor first the linkage that goes from the gear selector to the starting rope to block the rope to be pull when the motor is in gear was unattached , and still after fixing it every time you go into any gear it gets unattached second, the starting rope doesn’t retract all the way when you attend to start the engineBrand: HANGKAIDisplacement: 169CCGear ratio: 2.08(27:13)Cylinder: 2Max.speed(r/min): 4500-5500Gear Positions: F-N-RPacking size: 120×70.5×37.5cmIgnition System: CDICooling System: Water-coolingControl System: Tiller controlStarting System: Manual startControl System: #93 gasolineN.W./G.W.(kgs): 27/31Bore x Stroke(mm): 50x43Recommended Propeller range: 3 -9″1/4”x8″Recommended Lubricant: 2 Stroke Lubricating oilMixing ratio: Fuel:oil=50:1Trim and tilt system: Manual TiltOverall LxWxH(cm): 78.3×33.2x104Standard fuel tank capacity: 24L