MERCRUISER ALPHA ONE ( GEN 2 ) STERNDRIVE LOWER UNIT / LEG / OUTDRIVE 3.0 1999
Manufacturer Part Number: Does Not Apply
Type: Enclosure Curtain Kit
Warranty: No Warranty
California Prop 65 Warning:
Country/Region of Manufacture: United States
MERCRUISER ALPHA ONE ( GEN 2 ) STERNDRIVE LOWER UNIT / LEG / OUTDRIVE. Shifts great and was full of clean and clear gear oil This was removed from a 1999 3.0 140 hp boat. If you have questions just ask.. over thirty years in mercruiser professional services and on our second generation. We want your business now and in the future. This unit has a nice straight prop shaft and a clean carrier bearing area. We have not replaced the water pump. But are including it and the housing as was removed.. The skeg has a slight bend no chips drilled holes on the cavitation plate for a doel fin This unit is tight and shifts right ! The runout on the prop shaft shows low hours This has the speedometer pickup already Unit will be shipped sans gear oil . Gen two alpha ones appeared around 1991 in 1992. They were a redesigned version of the venerable mercruiser alpha one out drives. If you have a boat equipped with a lower unit that has four large bolts going through the area above the cavitation plate you more than likely have a generation 2 outdrive. Because a lot of boats have been re-powered over the years they have been upgraded to generation two so its very possible that your earlier year boat may be equipped with a generation 2 Drive and transom assembly / gimbal housing. Best thing to do is ask our professionals if for any reason you are not quite sure. Please see our store and follow us as a seller for more great deals like this one.