Marinco Shore Power Electrical

Your leisure time is serious to Marinco. The recreational brands of Marinco offer safe, reliable solutions for nearly every electrical and harsh environment application on your boat, RV, jet ski, snowmobile, or ATV.

From powercords to battery chargers, horns, wipers, and 12V products, Marinco products are tough, precision-made, and field-experienced to meet the demands of your passion-in-motion, whether it rides across the water, down the highway, up a snow-covered trail, or through the mud.

Marinco recreational products feature the marine brand names: Marinco® (shore power systems, 12 Volt connections); Guest® (battery chargers, galvanic isolators, spotlights, battery switches, interior lighting); AFI (horns, wipers, ladders, rod holders, teak accessories); Nicro (ventilation systems).

In addition, these five brands, the Ancor brand of marine grade™ wire, cable and terminals, and the newly acquired BEP brand (battery switches, digital monitors, switch panels, DC to DC converters) share the same corporate parent. Our combined brands are known as: The Marinco Electrical Group.

For nearly 35 years, Marinco has offered peace-of-mind for your harsh-environment electrical needs. Let us prove ourselves to you

Boating

Marinco marine products are the technological preference of boat engineers and builders as original equipment. They are also the popular selection of experienced consumers who choose Marinco through a global network of distributors and retailers.

From powercords to battery chargers, horns, wipers, and 12V products, Marinco products are designed and manufactured to exceed the demands of the marine environment.

Shore Power Cord Clips

• Organize shore power cords quickly and easily

• Fits 30A cordsets securely

• Can be used on tube or wire rails

• Packaged as set of 6, UV stable, practically unbreakable clips

CLIP-01 (Black)

Same features as our PowerCord

Plus® Marine Cordset, with 2.5mm2

Harmonized cable and IEC 60309

Male plug (Plug Ratings: 2P+E [6H],

IP44 splash resistance, 16A/230V).

Also comes with 16A Watertight

Connector Sealing Cap (199109) for

CE compliance.

16 Amp PowerCord Plus® Cordset w/ Female Connector

and IEC 60309 Male Plug

25 m. 25MSPPXP

20 m. 20MSPPXP

15 m. 15MSPPXP

10 m. 10MSPPXP

1 m. 1MSPPXP

A Shore Power Inlet is a water tight unit which is hard wired to the boats electrical system and normally mounted at the transom to enable shorepower to be taken on board (with male pins). 

A Connector is the female unit which is wired to the shorepower cable to connect to the Inlet. 

Marinco Shore Power Inlets and Connectors

Standard Features

- Easy Lock System - insures a positive waterproof seal 

Marinco 32 Amp Stainless Steel Shore Power Inlet - 6343EL-BX

Description: Solid cast 316 stainless steel. Locking waterproof cap. Soft Touch cap design - cap stays open in upright position; a "soft touch" lowers the cap. 8-way right angle rear safety enclosure

Marinco 230V Non Metallic Shore Power Inlet 32Amp - White

Description: Marine grade UV stabilized glass-filled polyester construction. Soft Touch cap design - cap stays open in upright position; a "soft touch" lowers the cap. Stainless steel trim on square flip-lid cover. 4-way right angle rear safety enclosure. 3-wire

Marinco 30A 125V Contoured Shore Power Inlet (with Chrome Cover)

Description: Marine grade UV stabilized glass-filled polyester construction. Soft Touch cap design - cap stays open in upright position; a "soft touch" lowers the cap. Watertight cap. 8-way right angle rear safety enclosure. Chrome Finish Cover.

Marinco Shore Power 32A Female Easy Lock Connector 6360CRNX

Description: Fits all the above.

Marinco Shore Power 32A Cover with Ring 7715CRN

Description: Shroud for Connector