Aqua Signal Navigation Lights Series 20

For vessels less than 12metres in length

Mininmum visibility: 2nm. Side lights 1nm. IMO 1972

Dimensions: Height 59mm, Witdth 74mm, Depth 38 (Std. Only)

Deck Mount: Height 51mm, Witdth 49mm, Depth 63

Designed for the smaller power boat

Made of white or black polycarbonate with an acrylic lens

Seawater resistant (to IP45) and non magnetic

All units are 12v and contain a 5W bulb

Aqua Signal Navigation Lights Series 25

For vessels less than 12metres in length

Mininmum visibility: 2nm. Side lights 1nm. IMO 1972

Dimensions: Height 73mm, Witdth 64mm, Depth 58 (Std. Only)

Designed for the smaller power boat or sail craft

Made of white or black polycarbonate with an acrylic lens

Seawater resistant (to IP45) and non magnetic

12v only although 24v can be achieved by replacing the 12v bulb with the 24v bulb

Aqua Signal Navigation Lights Series 40

For vessels less than 20metres in length

Mininmum visibility: 2nm. Masthead 3nm. IMO 1972

(Can also be used on inland waterways without length limitation)

Dimensions: Height 130mm, Witdth 89mm, Depth 79.5 (Std. Only)

Made from rigid polycarbonate with an attractive stainless screen

The S40 range is seawater resistant (to IP55), non magnetic and has rigid acrylic lenses.

All round colour units are available in pedestal mount or hoisting versions.

Pedestal mount units come in standard or 'quickfit' versions

Aqua Signal Navigation Lights Series 41

For vessels less than 20metres in length

Mininmum visibility: 2nm. Masthead 3nm. IMO 1972

(Can also be used on inland waterways without length limitation)

Dimensions: Height 105mm, Witdth 92mm, Depth 82 (Std. Only)

The S41 casing is seawater resistant (to IP55)

Non magnetic polycarbonate available in black or white with an acrylic lense.

The S41 Masthead light includes a combined 50W deck light

Aqua Signal Navigation Lights Series 50

For vessels less than 20metres in length

Mininmum visibility: 2nm. Masthead 3nm. IMO 1972

Dimensions: Height 137mm, Witdth 101mm, Depth 94mm (Std. Only)

The S50 light is both practical and attractive

Can also be used on inland waterways without length limitation

Made with a sea water resistant, stainless steel non-magnetic housing and rigid acrylic lens

All round colour units come in a pedestal mount or in hoisting versions

Aqua Signal LED Navigation Lights Series 32

Longer life expectancy - The temperature is the most important factor that decides the life expectancy of an LED. Where conventional LED’s tend to heat up uncontrollably which causes them to age, Aqua Signal uses thermo management. The LED-body is thermally connected to an aluminium casing which keeps it cool.

Outstanding lifetime of approximateley 10 000 hours.

Watertight - Electronics and the LED are moulded into a casing keeping them safe from water and dust, only the lense itself is visible.

The materials used are UV and saltwater resistant. The casing cannot be eroded by either and cause a malfunction in the electronics or diode.

Optimised lens optics - The lenses used by Aqua Signal are well above all requirements for brightness, exactness and lighting angles.

Reaching further than 2nm. This increases safety and lowers the ageing process of the lights.

The US office IMANNA confirms the exceptionally high quality of the lens and the positive result concerning vessel safety.

Low power consumption - Power consumption is very low at 1.5 watts and 0.04 - 0.25 Ampere.

Easy installation - Uses Aqua Signals "Quickfit" and it is also compatible with earlier navigation lights (series 40).